38
press the "Esc" key to exit the current setting.
16. Judgment value upper limit setting (ground resistance test)
In the ground resistance test mode, use the "▲" or "▼" key to select the
"Judgment value upper limit" setting content in the measurement parameter setting
interface, as shown below:
8.22 Ground Resistance “Judgment Value Upper Limit” Setting Interface
In this interface, press the "Input" key and use the numeric keys to set the upper
limit of the judgment value. After the selection is complete, press "Enter" to confirm. To
cancel the setting, press the "Esc" key to exit the current setting.
17. Judgment value lower limit setting (ground resistance test)
In the ground resistance test mode, use the "▲" or "▼" key to select the
setting content of "lower limit of judgment value" in the measurement parameter
setting interface, as shown below:
8.23 Grounding resistance "judgment lower limit" setting interface
In this interface, press the "Input" key and use the numeric keys to set the lower
limit of the judgment value. After the selection is complete, press "Enter" to confirm. To
cancel the setting, press the "Esc" key to b exit the current setting.
18. Open circuit alarm setting (ground resistance test)
In the ground resistance test mode, use the "▲" or "▼" key to select the "open
circuit alarm" setting content in the measurement parameter setting interface, as
shown in the figure below: