37
the range.
Hi-EN has the following options:
OFF: Disable comparator upper limit function
NO: Enable comparator upper limit function
14. Waiting time setting (insulation resistance test)
In the insulation resistance test mode, use the "▲" or "▼" key to select the
setting of the "wait time" on the measurement parameter setting interface, as shown
below:
8.20 Insulatio
n Resistance “Wait Time” Setting Interface
In this interface, press the "Enter" key and use
the "▲" or "▼" key to select the
range. After the selection is completed, press "Enter" to confirm. To cancel the setting,
press the "Esc" key to exit the current setting.
The insulation resistance wait time is between the start of the test and the wait
time until the comparator function is turned off.
Note: If the set time setting value is not in the range, the instrument will
automatically determine that it is not in the range and will automatically restore the
setting value to the previous setting value.
15. Test current setting (ground resistance test)
In the ground resistance test mode, use the "▲" or "▼" key to select the "test
current" setting content in the measurement parameter setting interface, as shown
below:
8.21 Ground Resistance "Test Current" Setting Interface
In this interface, press the "Input" key and use the numeric keys to set the test
current. After the selection is complete, press "Enter" to confirm. To cancel the setting,