CAUTION:
Always switch off the vacuum cleaner before connecting or disconnecting the hose/
attachments, or removing and emptying the dirt container.
IMPORTANT:
The vacuum cleaner is equipped with a thermal cut-out. If for any reason the
vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner
off. If this happens, switch the vacuum cleaner off and unplug. Remove and empty the dirt
container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for
approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully
dry before putting back into the machine). If the vacuum cleaner is blocked, switch off and
unplug before removing the blockage.
Familiarise yourself with these home maintenance tasks as proper use and care of your cleaner
will ensure continued cleaning effectiveness.
IMPORTANT:
Always switch off the vacuum cleaner before disconnecting or connecting the hose and
accessories. The accessories can be attached directly to the hose. This vacuum cleaner is fitted with a
constantly rotating brushbar. To avoid damage to your flooring, ensure the brushbar is raised to the
highest setting when using the accessories.
Using a crosshead
screwdriver, remove the
screw from the back of
the vacuum cleaner.
Line up tabs on the
upper hose connector
with the tabs in the
upper hose entry
point. Twist connector
clockwise until clicks
and locks into place.
Slide the handle down
into the main body of
the vacuum cleaner.
Wrap the hose over
the hose guide. Line up
tabs on the lower hose
connector with the tabs
in the lower hose entry
point. Twist connector
clockwise and lock
into place.
Return the screw and
tighten, securing the
handle into the main
body of the vacuum
cleaner.
Place the 2-in-1 crevice
tool and dusting brush
into the tool holder.
OPERATION
OPERATION
4
5
Assembling your upright
Plug vacuum
cleaner into the
mains, switch on.
To use the dusting brush, press the tab and slide the dusting brush forwards until it
clicks into place.
Turn brushbar height
adjuster dial to
desired setting.
Press the On/Off
button to switch on.
Place foot on floorhead
and pull handle
backwards to recline.
Twist lower hose
connector anti-clockwise
to unlock. Pull and
remove lower hose.
Choose an accessory.
Attach TurboTool
connector to hose before
attaching TurboTool
(some models only).
Attach accessory
to hose.
Using your machine
Using the accessories
2-in-1 crevice tool and dusting brush
