background image

6.

15.  Ensure the appliance is disconnected from the 

mains power supply before connecting the hose 

to the unit.

16. 

Do not

 operate or use the appliance without the 

dust bag and/or filters in place.

17.  Before vacuuming, remove any large or shaft 

objects from the floor or cleaning surface in order 

to prevent damage to the filter.

18.  If the air inlet, floor head or the telescopic tube 

is blocked, switch off the cleaner straight away 

and remove from the mains power. First clear 

the blocked object before attempting to start the 

cleaner vacuum again. 

19.  Hold the plug when rewinding onto the cord reel. 

To prevent accidental injury 

do not

 allow the plug 

to whip when rewinding.

20. 

Do not

 extend the power cable beyond the 

yellow mark.

21. 

Do not

 leave the appliance unattended when it is 

connected to a mains power supply.

22.  Before carry out any maintenance service 

or cleaning the filters, always switch off the 

vacuum cleaner and disconnect the plug 

from power supply.

23.  Keep ends of the hose, telescopic tube and 

other openings away from your face and body.

24. 

Do not

 use the vacuum cleaner if it is damaged 

or breaks down. Check the electrical regularly 

for defects. If connection cables, electrical 

hoses, electrical contacts and electric tubes are 

damaged, have them replace immediately.

25. 

Never

 clean the vacuum cleaner or any of 

the electrical parts, especially the electrical 

connections with water or liquid cleaners.

26. 

Never

 attempt to make any modifications 

electrically to the vacuum cleaner.

27.  Always store the appliance indoors in a cool 

and dry place.

28. 

Do not

 pick up water, dry household use only.

29.  Damage caused by improper use or by not 

observing the instructions in this manual will 

void warranty.

Vacuum Cleaner with Power Head

1.  The electric hose contains electrical connections;
 

-   

Do not

 immerse it in water for cleaning;

 

-   The hose should be checked regularly and 

must not

 be used if damaged.

 

-   The vacuum cleaner handle contains 

electrical connections the handle is not a 

serviceable part

 

-   The vacuum cleaner rod contains electrical 

connections the rod is 

not

 a serviceable part

 

-   The vacuum cleaner powerhead contains 

electrical connections the powerhead is not 

a serviceable part

2.  Use the electric power head only for vacuuming 

dust and dry substances in the home.

3. 

Never

 run over the power cable with the power 

head as the cable could get damaged.

4. 

Never

 touch the brush roller while the vacuum 

cleaner is connected to the mains.

5.  To prevent unnecessary wear on the power 

head cleaning nozzle keeps it moving while 

in operation.

Safety Precautions & Warnings

Summary of Contents for vogue 5015PH





















Reviews: