Maintenance
17.
Changing the Motorised Powerhead Drive Belt
WARNING: To reduce the risk of electric shock, turn all power off from the unit and
unplug the unit before performing any cleaning, maintenance or troubleshooting
checks. Failure to do so may result in electric shock or personal injury.
Depending on how much your vacuum is
used, the motorised powerhead drive belt will
occasionally require changing.
1. Disconnect the powerhead from the
telescopic tube.
Cleaning the Motorised Powerhead
The rotating brush must be free of debris for effective cleaning
and maximum suction. Disconnect the motorised powerhead
and turn it over to inspect the bottom. If a buildup of debris is
wound around the rotating brush, remove by carefully cutting
with scissors. Avoid damaging or cutting the bristles.
2. Turn the powerhead upside down and turn
the 3 locking rods anti-clockwise to unlock
the bottom plate.
