4
Carton contents
Remove all parts from carton and
identify each item shown .
Make sure all parts are located before
disposing of packing materials .
A
B
B
D
C
D
A
C
1. Cleaner assembly
1-1
A . Handle section
B . Cleaner
C . Crevice wand & dusting brush
D . Hose
attach hose
1-2
1-4
1-3
Align end of hose with projections (C)
over slots on dirt duct (D).
Slide hose into slots and twist hose to
lock it into place (To detach hose,
reverse procedure).
position hose
The hose is packed in a plastic bag
for shipping. Remove hose from bag
before assembly. Position hose over
rack and into hose tube (B).
NOTE: Hose must be connected at
the hose tube (B) and at the dirt
duct (D) on the back of the cleaner
for carpet or floor cleaning .
For
tool use, refer to Fig. 2-11 and 2-13.
attach handle
Press button (A) on back of handle
base and push handle down until
metal button on handle snaps out.
Press button (A) to raise and lower the
handle.
If you need assistance:
Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover® authorized dealer nearest you
or call 1-800-944-9200 for an automated referral of Hoover® authorized dealer locations (U.S. only) or to speak with a
customer service representative; Mon- Fri 8am - 7pm EST.
Please do not return this product to the store.
Summary of Contents for UH20060
Page 2: ......
