8.
Maintenance
WARNING! Ensure the cleaner is not connected to the mains powers supply
when performing any maintenance duties.
Always operate the cleaner with dust bag installed. The cleaner should be switched off and
disconnected from the mains supply. Never operate without filters as damage to cleaner
could occur. Empty the dust tank after every use, failing to do so may clog the filters and
cause poor suction.
Changing the dust bag
1. When the blockage indicator turns red or the suction is low replace dust bag or check any
blockage in the air channel.
2. Open the front cover. Pull the dust bag holder upwards to remove the dust bag.
3. Replace the paper bag when it is full of dirt and put in a new one.
4. Push the bag holder back and close the cover by pressing down until it is locked.
Summary of Contents for SMART H4012
Page 2: ...10 3 11 8 5 6 4 7 9 2 1 2...
