Hoover S1349, Owner'S Manual

Page: 5 / 9

5
2-6
2-5
2-9
2-7
2-10 2-8
Attaching tools
The tool and the floor nozzle are
attached to the hose or the wand in
the same manner. Push tool firmly
onto hose; twist tool slightly to
tighten or loosen connection.
Cleaning stairs
Clean stairs by placing cleaner on
end as shown. Clean stairs from
bottom to top.
E
H
G
F
F
The dusting brush/crevice tool
may be used for carved furniture,
table tops, books, lamps, lighting fix-
tures, venetian blinds, baseboards,
shutters and registers. Remove the
brush and use the crevice tool in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture, stairs
and baseboards.
Wand storage clip
The wand storage clip (F) fits into
the slot (G) at the rear of the cleaner
or the slot (H) on the bottom of the
cleaner.
Cleaning tools
Tool storage
The combination dusting
brush/crevice tool is stored on the
back of the cleaner.
Variable speed
control
The variable speed control (E) is
located on top of the cleaner.
Roll the control toward
— to reduce
energy consumption and to clean
lightly soiled areas or delicate fab-
rics.
Roll the control toward
+
for maxi-
mum cleaning power in heavily
soiled areas.
If the floor nozzle is difficult to push,
roll the control toward
—.