11
10
Using Your HUSHTONE
™
6Q Backpack
1
Check to ensure both filter bag
and HEPA filters are assembled
in the unit. Insert hose end firmly
into hose inlet, with elbow turned
toward vacuuming side.
1
Tighten waist strap until secure
and comfortable.
NOTE:
Should
you require additional length,
the extension belt can be placed
between belt ends and adjusted
to desired length.
3
Position lower rear pad into the
small of back so that weight of
machine is resting on the hips,
and not shoulders.
3
Connect the sternum strap buckle
and tighten or loosen as needed.
2
Loosen shoulder straps then
lift backpack, sliding both arms
through shoulder straps.
2
Pull down on ends of shoulder
straps until upper harness touches
shoulder blades. Nearly all weight
of machine should be on hips. You
should be able to easily slide your
finger between each strap and
shoulder. Retighten waist band
if necessary.
4
Slide sternum straps up or down
for adjustment.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY: REMOVE BATTERY BEFORE CLEANING OR SERVICING.
NOTE:
Do not use vacuum without both filter bag and HEPA filters in place.
AMBIENT TEMPERATURE RANGE:
0 °C – 40 °C (32 °F – 104 °F)
Harness Adjustment
NOTE:
The ergonomic harness is designed to easily identify the steps for wearing the backpack
correctly. Look for the numbered arrows on the corresponding parts called out in the directions below.
