background image

10. To reduce the risk of electric shock, do not immerse or expose the motor or any part

of the unit, plug or the power cord to water or any other liquid.

11. Never immerse the full unit in water or any other liquid for cleaning purposes.

12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to

disconnect the appliance from the mains. Always unplug the unit when not in use,

before cleaning or when adding or removing parts.

13. The use of accessory attachments that are not recommended or supplied by the

manufacturer may result in injuries, fire or electric shock.

14. A short cord is provided to reduce the hazards resulting from becoming entangled in

or tripping over a longer cord.

15. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is

not in a position where it can be pulled on inadvertently.

16. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or

electric burner or in a heated oven.

17. Do not use the appliance on a gas or electric cooking top or over or near an open

flame.

18. Use of an extension cord with this appliance is not recommended. However, if it is

necessary to use an extension lead, ensure that the lead is suited to the power

consumption of the appliance to avoid overheating of the extension cord, appliance

or plug point. Do not place the extension cord in a position where it can be pulled on

by children or animals or tripped over.

19. This appliance is not suitable for outdoor use. Do not use this appliance for anything

other than its intended use.

20. Do not carry the appliance by the power cord.

21. Do not leave this appliance unattended during use. Always unplug the unit when not

in use or before cleaning.

22. Always operate the appliance on a smooth, even, stable surface. Do not place the

unit on a hot surface.

23. Ensure that the switch is in the “Off” position after each use.

24. The manufacturer does not accept responsibility for any damage or injury caused by

improper or incorrect use, or for repairs carried out by unauthorised personnel.

25. In case of technical problems, switch off the machine and do not attempt to repair it

yourself. Return the appliance to an authorised service facility for examination,

adjustment or repair. Always insist on the use of original spare parts.

26. Failure to comply with the above-mentioned precautions and instructions, could affect

the safe operation of this machine.

27. Do not operate the unit with wet hands or without shoes.

Summary of Contents for HU87-TA-ZA
















Reviews: