Hoover HDPH 2D1049B-80, User Manual

Page: 14 / 44

5
12
Plug product in
Electrical connection
●
The dishwasher must not be connected to the electrical supply while installation is
being carried out. Ensure all domestic wiring is properly earthed.
Check the rating label (located on the left-hand side of the dishwasher’s stainless
steel inner door) and ensure that the voltage and frequency values for the current
●
in the house correspond to those on the rating label.
Insert the plug into a properly earthed power outlet that has a disconnection switch.
●
IMPORTANT!
The earthing of the appliance is a safety requirement mandated by law.
●
If the power cord is not long enough to reach the outlet or the outlet to which the
appliance must be connected is not appropriate for the plug, the entire dishwasher
power cord must be replaced. This should only be done by a Haier authorised technician.
Do not modify or cut the plug. Do not use an adaptor, extension cord, or multi-outlet
power board to connect the dishwasher to the power supply, as these could cause
overheating and create a fire hazard.
The outlet into which the dishwasher is plugged must remain easily accessible(e.g.
in an adjacent cabinet) even when the appliance is installed. This is to ensure that the
●
dishwasher can be disconnected from the power supply for safe cleaning and
maintenance.
Installation instructions