background image

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS IN THIS BOOK BEFORE
USING THIS MACHINE!

  If you do not understand, ask your supervisor.

WARNING:  To reduce the risk of fire, electric shock, or injury:

1. DO NOT USE THIS VACUUM FOR PICK UP OF WET DEBRIS.

2. Do not use outdoors or on wet surfaces.

3. Do not allow to be used as a toy.  Close attention is necessary when used by or near children.

4. You must be trained to operate this machine.  Operate this machine for its intended use only.

5. Do not operate this machine unless it is completely assembled.  The dust bag and/or filters must

be in place.  Use only manufacturer’s attachments.

6. Keep the machine and its electrical components dry.  Do not subject to rain. Store the machine in

a dry building area.  Clean the machine with a dry cloth only.

7. Machines can cause an explosion when near flammable materials and vapors.  Do not use or

store this machine with or near fuels, grain dust, solvents, thinners, or other flammable materials.
Do not use flammables to clean this machine.

8. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

9. Maintenance and repairs must be done by a qualified or authorized service center.

10. If the machine is not working as it should, has been dropped, damaged, left outdoors, or dropped

into water, return it to a service center.

11. Connect to a properly grounded outlet only (See Grounding Instructions).

12. To prevent electric shock, always remove the electrical plug from the electrical outlet before do-

ing any repairs or maintenance and when leaving the machine unattended.  Do not handle plug or
vacuum with wet hands.

13. Do not pull cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners.  Keep cord away from heated surfaces.  Do not use with damaged cord or plug.

14. Turn off all controls before unplugging.

15. Do not put objects into openings.  Do not use with any opening blocked: keep free of dust, lint,

hair and anything that may reduce airflow.

16. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.

17. Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine.

2

Summary of Contents for CH86000













Reviews: