Hoover CH86000 Parts Manual Download Page 12

WARRANTY POLICY

GROUND COMMAND WIDE AREA VACUUM LIMITED WARRANTY

The 

Hoover 

Wide Area Vacuum has been manufactured, tested and inspected in accordance with specific engineering

requirements and is WARRANTED to be free from defects in workmanship and materials as follows:

Five (5) years  parts, one (1) year labor – Rotational molded components.
One (1) year parts & labor – All other components unless excluded below.

This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with

Hoover 

Operating and Maintenance instructions.

This warranty does not apply to the following wear parts and accessories of the machine including:

Part Number           Part Name
 440001304
 440001305
 440001306
 440001307
 440001308
 440001309

       440001310

 440001311

Nor does it apply to damage or failure caused by improper use, abuse or neglect.  Warranty credit or replacement of
return parts including motors, pumps, etc., is subject to incoming inspection of those items.

To secure repair under this warranty, the following procedure should be taken:
·

The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery
charges prepaid.  If unable to locate the Dealer, you may contact 

Hoover 

at the address listed herein for the

location of the nearest repair center or agent or for other instructions pertaining to your warranty difficulty.

·

Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional
charge or cost to the user.

·

Only 

Hoover

 or its authorized dealers and agents may make no charge warranty repairs on this product.  All others

do so at their own risk.

This warranty limits 

Hoover

 liability to the repair of the product and/or warranted parts replacement and does not

include incidental or consequential damages arising from the use of a 

Hoover 

machine whether defective or not.

This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.

8/11

Paper Bag Filters
Cloth Filter Bags
Filter
Exhaust Filter
Brush
Cord Assembly
Hose Assembly
Belt

7500 Cochran Road • Glenwillow, OH 44139

Ph: (888) 321-1143

www.hoover.com

Part Number:  961130024

Summary of Contents for CH86000













Reviews: