43
Appendix A: Specification
Hardware Specification
Project name
TripMate Nano
Model name
HT-TM02
CPU
Model
Ralink RT5350
Frequency
MIPS24KEc 360MHZ
Flash
Model
EN25Q64-104WIP
Capacity
8MByte SPI flash
SDRAM
Model
M12L2561616A-6TG (SDRAM)
Capacity
32MB (256Mbit)
WiFi
Standard
802.11 b/g/n
Frequency
2.4GHz
Speed
72Mbps for 20MHz
150Mbps for 40MHz
Interface
WAN LED (Green)
Green: connection is successful
None: connection is failed
WiFi LED (Blue)
WiFi LED shows the system initiating state:
Start flashing: Kernel loading in process
Stop flashing: System initiation completes
Switch button
Switch the connect mode: Wireless /Wired
WAN port
RJ45 100Mbit/s
Reset button
Factory default reset button
USB host interface
USB 2.0:
Support USB flash/HDD
Antenna
Signal strength
2dBi (WiFi component)
14dBm (Main chip)
Environmental
requirements
Operating Temperature: 5°C to 40°C
Non-Operating Temperature: 0°C to 60°C
Operating Humidity: 5% to 90% (Non-condensing)
Non-operating Humidity: 5% ~ 90 % (Non-condensing)
Product dimension
56mm L x51mm W x 1mm H
Emission (EMI), Safety
& Other
Certifications
FCC Class B
CE
Software Specification
Summary of Contents for HT-TM02 TripMate Nano
