Hongqi HS5, Manual

Page: 139 / 400

4.3. Operating lights and wipers
137
4
Driv
in
g
■ Rain & lamp sensor
The sensor may not function properly if an object blocks
the sensor, or anything affixed to the windshield blocks
the sensor.
Doing so interferes with the sensor detecting the
ambient lamp intensity and may cause the automatic
headlamp system and automatic wiper malfunctions.

Automatic headlamp beam height adjusting system
The automatic headlamp beam height adjusting system can automatically adjust the headlamp beam height
according to the number of passengers, the load condition of the vehicle and the road environment to ensure
that the headlamps will not interfere with other road users.
Off-vehicle lighting system *
With the engine switch in IG - ON and lamp light switch in AUTO position, if the low beam lamp, position
lamp and license plate lamp are on, the door will be locked when the engine switch is turned to IG - OFF.
When the door is unlocked again, the above lamps will be on for a while and then automatically extinguish.
The on/off of lighting upon boarding and lighting time can be set in the vehicle setting of audio system. (See
P.223)
Boarding lighting system *
When the engine switch is in the "IG-ON" mode and the light switch is in the auto position, if the low beam,
position lights and license plate lights are on, then switch the engine switch to the "IG-OFF" mode and lock
the doors. When the door is unlocked again, the light will be on for a period of time, then it will turn off
automatically. The on/off of lighting upon boarding and lighting time can be set in the vehicle setting of audio
system. (See P.223)