Hongqi HS5, Manual

Page: 136 / 400

4.2. Driving Specifications
AUTO HOLD
134
When the AUTOHOLD function is standby, the vehicle’s auto hold will be activated when the brake
pedal is depressed with the gear position in D or N to stop the vehicle. At this time, if the brake pedal is
released. the vehicle will keep braking. When the accelerator pedal is depressed with the gear position
in D, and the system will release the auto hold to realize a smooth start.
Auto Hold ready state
Press the Auto Hold button, and the Auto Hold function
will be ready and the button indicator will light up.
Activating the Auto Hold
After depressing the brake pedal to stop the vehicle and
then releasing the brake pedal, the vehicle’s auto hold
function will be activated. At this time, the auto hold
indicator on the multi-functional display of the
instrument cluster turns on.
■ AUTO HOLD
● Depress the brake pedal and press the auto park button again to turn off the AUTOHOLD function.
● The automatic vehicle hold function may not stop the vehicle when on a steep slope. In that case it is
necessary to apply manual braking.
● Vehicles with AUTOHOLD are also provided with hill start assist function.
● EPB electronic parking brake will take over AUTOHOLD after the vehicle’s auto hold is activated for about
3 minutes.
■ Operating conditions for AUTOHOLD
Conditions for activating the Auto Hold:
● Close all doors.
● Driver wears the belt.
● Start the vehicle and press the AUTOHOLD button.