- 7 -
Example 2:
set up the eighth defense area of 12-pin wireless detector:
Code on the back of the controller Setup the first defense area of 12-pin
4.3 Operation Code
Table II
01#
Arm the host(default)
01*
Disarm the host
02#
Three minutes of linkage output
02*
Close the linkage output
03#
Give off alarm sound for three minutes
03*
The host stops the alarm sound
11#
The host will give off alarm sound when
receiving an alarm(default)
11*
The host will not give off alarm
sound when receiving an alarm
12#
The host will reply the three alarm
numbers by message(host's status) when
arming/disarming defense by the
controller
12*
Close the function of replying the
alarm number by message(default)
21#
Set up the wired defense area as open
circuit alarm
21*
Set as closed circuit alarm (default)
31#
Change the password. Ex.: change to
5678,edit and send 1234#5678#to the
host
40#
Inquire the preset message receiving
number(s)
41#
Set up the first message alarm
receiving number
42#
Set up the second message alarm
receiving number
43#
Set up the third message alarm
receiving number
50#
Inquire the preset call alarm receiving
number(s)
51#
Set up the first auto dialing alarm
number
