- 10 -
phone by message after receiving,
Ex.:
edit wired defense area1 as home alarm, edit and send
1234#71#home alarm#
to the host, the host will reply the mobile phone by message after receiving.
Seethe table of Operation Code for details.
(2) Setup of the wireless defense area message (flexible edit): the message of the wireless defense
area (eight) sent by the host to the alarm receiving mobile phone may be flexibly edited, the default
is wireless defense 1 alarm and wireless defense area 2 alarm...wireless defense area 8alarm, edit and
send
1234#8*message#
(*means1-8,1 represents the first defense area) to the host, and the host
will reply the mobile phone by message after receiving,
Ex.:
edit wireless defense area 1 as alarm
storehouse, edit and send
1234#81#alarm storehouse#
to the host, and the host will reply the
mobile phone by message after receiving. See the table of Operation Code for details.
4.4.8 Inquiry of wireless defense area message
If you want to inquire the message by the host to the wireless defense area, edit and send
1234#80#
to the host, and the host will reply the mobile phone by message after receiving.
4.4.9 Setup of open circuit/short circuit alarm of the wired alarm terminal
Open circuit or short circuit may be selected for alarm, it is defaulted to alarm when the wired
terminal occurs short circuit, if you want switch to open circuit, edit and send
1234#21#
to the host,
and the host will reply the mobile phone by message after receiving, if you want to switch to short
circuit, edit and send
1234#21*
to the host, and the host will reply the mobile phone by message
after receiving.
4.4.10 Change of the host's password
When the host is in normal use,edit and send
1234#31#new password#
to the host, the initial
password is 1234.
Ex.:
change the password into 4321, edit and send
1234#31#4321#
to the host,
and the host will reply the mobile phone by message after receiving.
4.4.11 Setup of the host's reply via the controller
When you use the remote controller to operate the host, you may set up whether to reply the
message alarm receiving numbers, it's defaulted not reply, if you want the host to reply ,edit and
send
1234#12#
to the host, if not, edit and send
1234#12*
to the host.
4.5 Setup of the host by phone call
Dial the host number and then press operation codes after hearing a beep sound. It means the
operation is successful if you hear a long beep sound, two beep sounds mean the operation fails and
please repeat the operation.
5. Use Method
5.1 Arm/disarm by remote controller
When the master leaves the defense area, press Lock Key on the remote controller, the host will
give off a beep sound, and the arming status indicator blinks, when the master gets back, press
Unlock Key to close the system, the host will give off a beep sound and the indicator keeps lighting
