COMPACT I/O MODULE
95-7716—1
6
nvoHigh_1...8
SNVT_switch
When exceeding the temperature set in UCPTHighT the
output variable changes from 0,0 0 to 100,0 1. When under-
running the temperature set in UCPTHighT plus the hysteresis
set in UCPTHyst the output variable changes from 100,01 to
0,0 0.
nvoLow_1...8
SNVT_switch
When under-running the temperature set in UCPTLowT the
output variable changes from 0,0 0 to 100,0 1. When
exceeding the temperature set in UCPTLowT plus the
hysteresis in UCPTHyst the output variable changes from
100,0 1 to 0,0 0.
UCPTTemp_Offset
SNVT_temp
The respective measurand can be readjusted in steps of 0.1 K.
UCPTSensor_tab
Factory setting: NTC20k in the range-22° F to 266° F (-30° C to +130° C).
UCPTTempMax
SNVT_temp Werk:
+ 302° F (+150° C)
UCPTTempMin
SNVT_temp Werk:
- 58° F (-50° C)
The temperature output variables are calculated during
voltage measurings according to a 0 to 10 Volt input signal
and the here selected range.
UCPTHighT
SNVT_temp Werk:
+212° F (+100° C)
UCPTLowT
SNVT_temp Werk:
-14° F (-10° C)
Setting of the thresholds nvoHigh and nviLow to make the
switch variables switch over.
SCPTinvrtOut
SNVT_lev_disc
Inverting the values at nvoHigh or nvoLow.
LON
®
, LonMark
®
, LNS
®
and Echelon
®
are registered trademarks of Echelon Corporation.
Temperature
° F (° C)
Resistance
Sensor Name
ST_ON
(Resistance)
ST_OFF
(Voltage)
