5
EN
User instructions
CONNECT TO EXTERNAL DEVICES
First time pairing
At powering on select the headset
VS332i Audio in mobile settings
*C10
flashing blue. Paired *C10 solid blue 5s
Manual pairing
Hold *C6 for 2s
*C10
flashing blue. Paired *C10 solid blue 5s
Clear paired device list
Hold *C6 for 2s
*C10
flashing blue. red
Pairing error
*C10
solid red 5s
CALL MAKING
Answer incoming call
Press
*C6
End call
Press
*C6
Reject incoming call
Hold
*C6
3s
Mute/Unmute Microphone
Hold
*C8
2s
Unmute
Press
*C7
AUDIO PLAYBACK FROM PHONE
Play
Press
*
C6
Pause
Press
*
C6
Volume Up
Press
*
C7
Volume Down
Press
*
C8
MAINTENANCE
Firmware Over the
Air (FOTA) update
Refer to mobile app for instructions
*C4
flashing blue, when complete - solid blue,
then off
Factory reset
Turn the device Off and remove the
batteries. Press and Hold
*C2
for 20s while
re-inserting the batteries
*C4 flashing blue. Device then enters Recovery
mode, *C4 solid blue
Recovery mode
Firmware has been updated and device is in
a Recovery state
*C4
Solid blue until firmware has been updated
Device Self-Check
The device is completing an automatic self-
check to prevent data corruption
*C4
blinking blue until the Self-Check is
complete
Error State
The device has encountered an error
*C3
Solid Red +
*C4
Solid Red
CONNECT TO EXTERNAL DEVICES, AUDIO & CALL MAKING
Enable Bluetooth on your mobile device and ensure that the mobile device is within 10m of the
headset. The headset must be selected in the mobile device settings. Next time the headset is
turned ON, it will try to automatically pair with the last paired device.
CALIBRATION
Calibration in progress
Refer to mobile app
for instructions
*C3
Blinking Green
Calibration complete
*C3
Solid Green
POWER MANAGEMENT
Power On
Above 10% battery life
*C4
Solid Green
Power Low
Less then 10% battery life
*C4
Flashing Red
Auto shut off
After 4 hours of no activity
Audio tone
CALIBRATION
The headset can be calibrated, please follow the instructions in the App
MAINTENANCE
POWER MANAGEMENT
