background image

60-0164—1

4

C554A CADMIUM SULFIDE FLAME DETECTOR

Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Scarborough, Ontario
M1V 4Z9

60-0164—1   J.S.   Rev. 2-96

Automation and Control Solutions
Honeywell Inc.
1985 Douglas Drive North
Golden Valley, MN 55422

Summary of Contents for TRADELINE C554A

Page 1: ...M7854 PLUG IN CELL MOUNTING BRACKET SOCKET LEADWIRE Fig 1 C554A Cadmium Sulfide Flame Detector cad cell INSTALLATION When Installing this Product 1 Read these instructions carefully Failure to follow them could damage the product or cause a hazardous condition 2 Check the ratings given in the instructions and on the product to make sure the product is suitable for your application 3 Installer must...

Page 2: ...sert the mounting bracket into the slot on the socket Fig 3 as far as it will go NOTE Bend the mounting bracket to fit if necessary 쐋 While holding the mounting bracket in the slot insert the screwdriver in the other end of the slot Fig 4 Bend the screwdriver first to the left then to the right to crimp the end of the mounting bracket and hold it in position 쐏 Remove the screwdriver and replace th...

Page 3: ...n terminals F F Connect an ohmmeter across cad cell leadwires resistance should be less than 1600 ohms 쐇 Stop burner and remove temporary jumper 쐋 With burner off check dark cell resistance across cad cell leadwires Resistance should be greater than 20 000 ohms NOTE If cell resistances are different than specified recheck wiring and location of cell If necessary replace plug in portion of cell Hon...

Page 4: ...UM SULFIDE FLAME DETECTOR Honeywell Limited Honeywell Limitée 35 Dynamic Drive Scarborough Ontario M1V 4Z9 60 0164 1 J S Rev 2 96 Automation and Control Solutions Honeywell Inc 1985 Douglas Drive North Golden Valley MN 55422 ...

Reviews: