THX9321 PRESTIGE
®
2.0 AND THX9421 PRESTIGE
®
IAQ WITH EIM
68-0311—02
16
2.
Follow the prompts on the thermostat screen until you
reach the Wireless Setup screen. See Fig. 30.
Fig. 30.
3.
While the Connected light is flashing green on the EIM,
press Next on the thermostat. After a short delay, the
screen will display Device Connected.
Fig. 31.
4.
Press Next, as directed on screen, to link RedLINK
accessories.
Linking RedLINK™ Accessories
Fig. 32. Connect RedLINK accessories.
1.
When you see the prompt
Do you have RedLINK
accessories to connect?
touch Yes or No.
a. If you select No, continue to step 5.
b. If you select Yes, you will be prompted to Press Con-
nect on New Accessories. Continue to step 2.
NOTE: Accessories must be at least 2 feet away from the
thermostat or EIM during the linking process.
2.
While the Add Device screen is displayed (listening
mode), press and quickly release the CONNECT button
on each new RedLINK accessory.
NOTE: For locations of CONNECT buttons on
RedLINK accessories, see “Locating the Con-
nect Buttons on RedLINK Accessories” begin-
Fig. 33. Thermostat in listening mode.
3.
After a short delay (up to 20 seconds), check the thermo-
stat to confirm the connection of each RedLINK acces-
sory.
Fig. 34. Thermostat in listening mode.
4.
Touch Done at the thermostat after all new RedLINK
accessories are connected.
NOTE: The thermostat displays a countdown timer
while in the listening mode. If it detects no activ-
ity for 15 minutes, it exits the listening mode.
Next
Next
Done
