Honeywell Thor VM2C02, User Manual

Page: 26 / 70

Rev. (a)
Ignition Control Power Scheme, Ignition Off
This power scheme is used when the Ignition Control power configuration mode is selected and the vehicle ignition is Off.
Switch state to User Idle Default is After 1 minute
Switch state to System Idle Default is After 5 minutes
Switch state to Suspend Default is After 1 hour
Shutdown Default is After 8 hours
Auto On Power Scheme
This power scheme is used when the Auto On power configuration mode is selected.
Switch state to User Idle Default is After 1 minute
Switch state to System Idle Default is After 1 hour
Switch state to Suspend Default is After 8 hours
Shutdown Default is Never
The timers are cumulative. The System Idle timer begins the countdown after the User Idle timer has expired and the Suspend
timer begins the countdown after the System Idle timer has expired. When the User Idle timer is set to “Never”, the power
scheme timers never place the Thor VM2CG in User Idle, System Idle, Suspend or Shutdown modes (even when the Thor
VM2CG is idle).
Using the UPS Power Scheme Defaults listed above, the cumulative effect results in the following:
l
The backlight turns off after 30 seconds of no activity,
l
The display turns off after 90 seconds of no activity (1 30 seconds),
l
The Thor VM2CG enters Suspend after 11 minutes and 30 seconds of no activity,
l
And the Thor VM2CG shuts down after 31 minutes and 30 seconds of no activity.
2-14