Installation Guide
10
69-2486—03
DONE
20
0120
DONE
1
0
TEST
M29488
During installer setup, press
t
repeatedly until “Test” appears.
Test
number
System
status
Press
t
to
select test
Press
t
to
change status
Press
DONE
to terminate testing.
1
Cooling system
0
Compressor and fan turn off
1
Compressor and fan turn on
2
Second stage compressor turns on
2
Fan system
0
Fan turns off
1
Fan turns on
3
Heating system
0
Heat and fan turn off
1
Heat turns on (fan on if Function 0170 is set for heat pump,
or if Function 0180 is set to “1”)
2
Second stage heat turns on
4
Emergency
heating system
0
Em Heat and fan turn off
1
Em Heat and fan turn on
2
Second stage heat turns on (Auxiliary heat)
System test
System status
CAUTION: EQUIPMENT DAMAGE HAZARD.
Compressor protection is bypassed
during testing. To prevent equipment damage, avoid cycling the compressor quickly.
Installer system test
Z-Wave enrollment
1.
To join a Z-Wave
network, set the
Z-Wave controller
to INCLUDE mode.
2. Select 1 to add
thermostat to
Z-Wave network.
DONE
0
F
M32423A
10
