39
Operating Wind Window
In the
Wind Window
press the
SET
button to recall:
•
Wind chill temperature with wind direction in bearings
•
Wind chill temperature with a wind direction in compass points
•
Temperature at anemometer and wind direction in compass points
•
Temperature at anemometer and wind direction in bearings
Programming Wind Speed Units
In the
Wind Window,
press and hold
SET
button to set the wind speed units in km/h, mph, m/s or
knots.
Viewing Wind Statistics
In the
Wind Window
, press the
MEMORY
button to recall:
•
Current wind speed
•
Daily maximum wind speed with “
DAILY MAX
” displayed
•
Wind gust speed with a “
GUST”
displayed
•
Daily maximum gust speed with a “
GUST DAILY MAX”
displayed
Resetting Wind Statistics Memory
In the
Wind Window
, press and hold
MEMORY
button to reset all wind statistics.
Activating or Deactivating Alarms
In the
Wind Window
press
ALARM/CHART
button to recall
•
Current wind speed
•
Wind speed alarm with the “
ALARM HI”
displayed
•
Wind gust alarm with the
“GUST ALARM HI
” displayed
•
Daily maximum wind speed with “
DAILY MAX
” displayed
If the specific alarm is disabled,
“OFF”
will be displayed; otherwise the alarm value will be shown.
When the wind alarm is displayed, press the
UP
or
DOWN
arrow button to activate or deactivate it.
.
Programming High Wind Alarm
•
In the
Wind Window
, press
ALARM/CHART
button
to select the desired alarm (wind
speed or wind gust speed)
•
Press and hold
ALARM/CHART
button until speed digit will flash.
•
Set the alarm using the
UP
or
DOWN
. Press and hold either button for fast digits
advance.
•
Press
ALARM/CHART
button to confirm your selection and return to the high wind alarm
selection screen.