36
Accessing Temperature and Humidity Mode
From the main unit: Press
UP
or
DOWN
until the
IN
icon
on the upper right will flash.
From the remote control: Press .
Viewing Remote (Channel) Temperature and Humidity
Static Display:
In
Temperature and Humidity Window
, press the
CHANNEL
button every time to recall a
different channel.
Channel Auto-Scan Display:
To enable automatic scan of the different channels, press and hold
CHANNEL
button, until the
3
icon is displayed. Each valid channel will be alternately displayed with a 5 seconds delay.
NOTE
: The channel Auto-scan feature can be active only if there
are more than
one
remote
sensors operating and are set to different channels.
Recalling Temperature and Dew Point Information
In
Temperature and Humidity Window
press
SET
button recalling either:
•
Temperature and relative humidity
•
Dew point and relative humidity
Programming Temperature in Celsius or Fahrenheit
In
Temperature and Humidity Window
, press and hold
SET
button to toggle the temperature in
Celsius (
ºC
) or Fahrenheit (
ºF
).
Activating/Deactivating Alarms
In
Temperature and Humidity Window
, press the
ALARM/CHART
button to recall a current
temperature for the corresponding channel, the upper temperature alert with
▲
icon (if disabled,
displays
OFF
), or lower temperature alert with
▼
icon (if disabled, displays
OFF
).
Once the above alerts are displayed, press the
UP
or
DOWN
arrow button to enable or disable the
corresponding alert.
Programming Alarms
•
In the
Temperature and Humidity Window
, press
ALARM/CHART
button
selecting
the
desired
alarm.
•
Press and hold
ALARM/CHART
button until the remote temperature and
▲
or
▼
icon
starts flashing.
•
Adjust the temperature digits for the Temperature Alarm using the
UP
or
DOWN
arrow
button. Press and hold either button for fast digits advance
•
Press the
ALARM/CHART
button to confirm selection and return to the temperature