31
Time Zone setting mode (the Time Zone data is provided on P.)
•
Set the Time Zone by pressing
UP
or
DOWN
arrow button to adjust the time in 30 min
intervals. Press and hold either button for quick digits advance
•
Press
SET
button to confirm selection – the “
DST no”
will flash prompting to set the
Daylight Savings Time option
•
Press
UP
arrow button to enable and
DOWN
to disable the DST option
•
Press
SET
button to confirm selection and the year digits will flash
•
Continue setting the year, month, day, calendar format (day/month or month/day), time
format (12 or 24 hours), local hour and minutes, using the same technique
After programming is complete the display will return to the default
Time Window
.
Note
: Press and hold
SET
button anytime during the setup to return to the default
Time Window
and all previous settings will be cancelled
.
Clock and Calendar Modes
In the
Time Window
press
SET
button each time selecting either:
•
Hour and Minutes with the Day of the week
•
Hour and Minutes with the City code
•
Hour and Minutes with the Seconds
•
Month with the day and a year
•
Hour and Minutes for UTC (Coordinated Universal Time)
Activating or deactivating alarms
•
Press the
ALARM/CHART
button to display the Weekday Alarm (
W
), Single Alarm (
S
) or
Ice Warning Alarm (
Pre-Al
) time. If these alarms are not set, the abbreviation
OFF
will be
displayed
•
To enable or disable any of these alarms, press
UP
or
DOWN
arrow button
Note: Press
SET
button anytime during alarm selection mode to return to the default clock display.
.
Programming Alarms
•
In the
Time Window
, press the
ALARM/CHART
button
selecting the desired alarm-
W
,
S
or
PRE-AL
•
Press and hold
ALARM/CHART
button until the hour digit will flash
•
Set the alarm hour using the
UP
or
DOWN
arrow button. Press and hold either button for
quick digit advance.
•
Press
ALARM/CHART
button to confirm selection
•
Set the alarm minutes using
UP
or
DOWN
arrow button. Press and hold either button for
quick digit advance
•
Press
ALARM/CHART
button to confirm selection – the snooze interval digits will flash
•
Set a Snooze interval (all three alarms share same snooze time duration) using
UP
or
DOWN
arrow button. Press and hold either button for quick digit advance