background image

T8501 AND T8511 DELUXE ELECTRONIC THERMOSTATS

68-0162—1

2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:

1.

Your local Home and Building Control Sales Office (check white pages of your phone directory).

2.

Home and Building Control Customer Relations
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

IMPORTANT

The specifications given in this publication do not
include normal manufacturing tolerances; therefore,
an individual unit may not exactly match the listed
specifications. Also, This product is tested and
calibrated under closely controlled conditions, and
some minor differences in performance can be
expected if those conditions are changed.

Models:
See Table 1.

Electrical Rating:

Input Power: 18 to 30 Vac, 50/60 Hz.
Load Rating: See Table 2.

Temperature:

Setpoint Range: 40

°

F to 99

°

F (4

°

C to 37

°

C) depending on

model and if in heating or cooling.

Display Range:

Controlled: 30

°

F to 110

°

F (1

°

C to 43

°

C).

Outdoor: -30

°

F to 120

°

F (-34

°

C to 49

°

C).

Display Updates:

Controlled: updated every minute.
Outdoor: displayed on demand and updated every
10 minutes.

Differential (auto changeover models):

3

°

F (1.5

°

C) minimum.

Interstage Differential:

1.7

°

F (0.9

°

C) heat pump models.

Minimum Off Time (Cooling and Heat Pumps):
5 minutes 

±

 0.5.

Table 1. T8501 and T8511 models.

Table 2. Maximum Amps at 18 to 30 Vac.

Relay

Running (A)

Inrush (A)

Heat

.02 to 1.5

3.5 at 200,000 cycles

Cool

.02 to 1.5

7.5 at 100,000 cycles

Fan, Reversing Valve, Emergency Heat

.02 to 0.5

2.5 at 200,000 cycles

Model

System

Changeover

System Selection

Fan

Selection

Comments

T8501D

Heat-Cool

Automatic/

Manual Selectable

Heat-Off-Cool-Auto

On-Auto

System and fan selections are
done by keyboard.

T8511G

Heat pump

Automatic/

Manual Selectable

Em. Heat-Heat-Off-Auto-Cool

On-Auto

System and fan selections are
done by keyboard.

Summary of Contents for T8501

















Reviews: