Honeywell Switches and Sensors, Brochure, Page: 127 / 148

125
www.honeywell.com/sensing
ULTRASONIC DISTANCE SENSORS
M12 Connectors
OPTIONS
WITHOUT CABLES
M12 female, 5 pin, 5 screw terminals
The 66195044-001 is used for the 940, 941, 944,
947 series but may be used for any industrial
sensor with standard M12 4 pin or 5 pin
connector. The 66195044-001 connector is
usually included with every sensor of the above
series for connectorised models.
Use with Series: 940, 941, 944, 947
Housing: Plastic
Termination: Female M12
Number of pins: 5
REFERENCE
66195044-001
M12 female, 7 pin (942 Series)
The 66195074-001 is used for the ultrasonic
distance sensor heads 942-A4M. It needs to be
wired and soldered at the setup of the sensor. The
66195074-001 is included in every package of the
942 separate series (942 M3A...) but not in the
spare ultrasonic heads (942-A4M..).
Use with Series: 942
Housing: Stainless Steel
Termination: Female Binder
Number of pins: 7
REFERENCE
66195074-001
WITH CABLES
M12 female, 5 pin, 2 metre cable
(supplied with 946 Series)
The 55002 is a 5 pin, M12 female, metal, cable
connector with 2 metres of cable attached. It is
used with the 946 series but may be used for any
industrial sensor with standard M12 4 pin or 5 pin
connector. The 55002 cable connector is included
with every sensor of the 946 series.
Use with Series: 940, 941, 944, 946, 947
Termination: Female M12
Number of pins: 5
REFERENCE
55002
Female, 8 pin, 2 metre cable (942
Series Compact)
The 55195126-001 is an 8 pin, female, metal,
cable connector with 2 metres of cable attached.
It used with the 942-A4N compact series. This
device is useful but not necessary to setup the
sensor, as every ultrasonic distance sensor 942-
A4N is provided with a female connector without
cable, with pins to solder.
Use with Series: 942
Housing: Stainless steel
Termination: Female Binder
Number of pins: 8
REFERENCE
55195126-001
Mounting Clamps
The 43178389 are plastic mounting clamps
usually used with the ultrasonic distance sensors,
but may be used with any M18 or M30 industrial
sensors. The 43178389 feature 2-part plastic
clamps with 2 M5x60 mm screws and nuts.
OPTIONS
M18
Use with Series: 940
Housing: Plastic
REFERENCE
43178389-018
M30
Use with Series: 942, 944, 946, 947
Housing: Plastic
REFERENCE
43178389-030