Honeywell Stratos 2700, User Manual

Page: 92 / 278

4 - 20
When the output sequence is Off , the bar code data is output to the host as the scanner decodes it. Default = Off.
No Read
With No Read turned On , the scanner notifies you if a code cannot be read. If using an EZConfig-Scanning Tool Scan Data
Window (see page 12-2 ), an “NR” appears when a code cannot be read. If No Read is turned Off , the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the output message (see Data
Formatting beginning on page 8-1). The hex code for the No Read symbol is 9C.
Required
On/Not Required
*Off
On
* Off