2 - 1
2
Use the SRX-SL Headset
Out of the Box
The following items may be packaged separately:
•
SRX-SL eModule (electronics module)
•
SRX-SL headband
•
Optional Micro-USB charging kit
Keep the original packaging material in the event the SRX-SL headset should need to be returned for service.
Initial Use
1.
1.
2.
Turn the headset on by pressing and holding the power button at least 1/2 second and releasing.
3.
Pair the SRX-SL Headset Using Bluetooth
Pair the SRX-SL Headset Using Near Field Communication
4.
5.
If the SRX-SL headset is used for an extended period of time and the battery level becomes low, use the
page 2-2) to return the headset to service faster (with a 75% recharged battery).
Charge the SRX-SL Headset
The SRX-SL headset contains an internal battery. The battery cannot be removed by the user. If it is necessary to replace the
battery, the headset must be sent to a Honeywell repair center.
Allow up to three hours to fully charge a depleted SRX-SL battery. The temperature must be between 32°F to 104°F (0°C to
40°C) to charge the battery.
See
(see page 2-2) for information on partially charging the SRX-SL battery in a shorter time period.
Note: During the charging process, Bluetooth is disabled on the SRX-SL headset.
To charge the headset:
1.
Plug the micro-USB end of the cord into the SRX-SL headset.
2.
Plug the other end of the cord into the AC adapter provided with the charging cable. The LED lights solid red while
charging.
3.
Allow the SRX-SL headset to charge a minimum of three hours before first use. It may take up to three hours to fully charge.
The LED lights solid green when charging has completed.
4.
Unplug the SRX-SL headset from the cord.
5.
The SRX-SL headset is powered down when removed from the charging connection.
6.
Press the Power button for at least 1/2 second. The SRX-SL headset powers on and is ready for use.
