SmartLine Multivariable Transmitter
10
Quick Start Installation Guide
December 2015
WIRING CONNECTIONS AND POWER UP
Summary
The transmitter is designed to operate in a two-wire power/current loop
with loop resistance and power supply voltage within the HART/DE
operating range shown in
Figure 7.
Figure 7: HART/DE Transmitter Operating Ranges
Loop wiring is connected to the Transmitter by simply attaching the
positive (+) and negative (–) loop wires to the positive (+) and negative
(–) terminals on the Transmitter terminal block in the Electronics Housing
shown in
Figure 8
. Connect the Loop Power wiring shield to earth
ground only at the power supply end.