MAN0905_Issue 7_07/17
Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
85
18.2.7 CCCF (China)
Certificate Number:
CE031155
Ex d IIC T4/T5
18.2.8 IECEx
Certificate Number:
BAS 13.0069X
18.3 Performance Approvals
18.3.1 ATEX
Certificate Number:
BVS 03 ATEX G 016 X
Special conditions for safe use
The following special properties have to be considered at operation of the remote sensor:
•
See EC-type examination certificate Baseefa 13ATEX0296X
•
The parameter “warning” shall not be set to values between 3 mA and 5 mA
•
Searchpoint Optima Plus shall be calibrated using the target gas or vapour
•
The Modbus-interface is not subject of this supplement to the EC-type examination certificate
•
The HART-interface is included in this supplement to the EC-type examination certificate with
respect to the use for configuration, commissioning, test and maintenance of the remote sensor
•
Do not use the light ring indication of the junction box HALO for safety related purposes
18.3.2 FM
Certificate number: 3015165
This Approval does not include or imply Approval of apparatus to which the subject instrumentation may
be connected. In order to maintain an FM Approved system, the apparatus to which this instrument is
connected must also be Approved by FM Approvals.
As part of this Approval, it was verified that optional communication functions of this gas detection
instrument while operating at the maximum transaction rate do not adversely affect the gas detection
operation and functions of the instrument. This Approval, however, does not include or imply Approval
of the communications protocol or functions provided by the software of this instrument or of the
communications apparatus or software connected to this instrument.
18. Certification and Approvals