12
D
EFAULT
S
ETTINGS
Many functions of the IS4125 decode scan engine can be configured or
enabled/disabled. The decode engine is shipped from the factory configured to a
set of default conditions. The default parameter of the decode scan engine has
an asterisk (*) in the charts on the following pages. If an asterisk is not in the
default column then the default setting is
OFF
or
disabled
. Every interface does
not support every parameter. If the interface supports a parameter, a check
mark (
) will appear in interface column.
Parameter
Default
RS232
OR
RS232
TTL
Light
Pen
Keyboard
Wedge
USB
Enter Configuration Mode, After Any Scan
*
Enter Configuration Mode, Only on First
Scan
Short Range Activation
Long Range Activation
*
Normal Scan
*
Custom Scan
DTR Activation
DC2 Activation
Address Based Activation
“NOREAD” message Transmission
Turn on Green LED during “NOREAD”
Transmit
*
Same Symbol Re-scan
*
Green LED Identical Symbol
Re-Scan Indicator
1 Vs 2 Scan Buffers
1
2X Redundancy (MECCA)
Double Border Requirement
(Large Intercharacter Space Requirement)
Alternate Beeper Tone 1
Alternate Beeper Tone 2
*
Alternate Beeper Tone 3
No Beeper tone
Two Second Timeout
