6
Chapter 1
INTRODUCITON
1.1 Features
This keyboard controller is capable to control 32 ScanDomeII
™
dome cameras and remote control
functions for variety of external switching devices like Multiplexer(max 255) etc…
The keyboard controller features:
•
The capability of control a camera’s panning and tilting movement with variable speed from 0.5
°
/sec
to 90
°
/sec as well as its zoom, focus, and iris command. Normal speed is inversely proportional to
the current zoom ratio. Turbo speed is Max 380
°
/sec when
Ctrl
key pressed.
•
The ability to define and recall up to 240
presets
, which are immediate camera call-ups of preset
position view, with automatic zoom and focus.
•
The ability to define and run up to 8
patterns
, which comprise a sequential series of pan, tilt, zoom,
and focus movements from a single camera.
•
The ability to define and run up to 8
scans
, which scan between two limits.
•
The capability to incorporate up to 300 of the presets, patterns, scan and tour itself in up to 8
tours
,
where the presets, patterns and scan automatically displayed one after the other on the Main monitor.
•
Global preset
recalls preset of all dome cameras.
•
Auto Iris mode activated by moving the joystick slightly.
•
Auto Focus mode is activated by twisting the zoom handle slightly.
•
Programmable user preferences (alarm, preset, title, etc.).
•
Administrator and user, two levels of password are supported for higher security.
•
One Master and slave Keyboard is supported to control in a distant place.
•
Multiplexers (Max 255) can be controlled remotely.
•
Up to two programmed data from domes can be downloaded to none volatile memory space in KBD,
and uploads to a new dome.
Slave Keyboard
<Flashing Light>
UP TO 32 CAMERA
J-box
J-box
Master Keyboard
UP TO 255 MULTIPLEXER
<Sensor>
<Siren>
UP TO 4
Output
Alarm
UP TO 8
Alarm Input
Figure 1 – Typical system Configuration