15
2.4 Master & Slave Keyboard setting
You can use two keyboards at distant site.
Master keyboard should be setup as following procedure.
1. Check for dip switch the 7
th
of S2 “OFF”.
2. P
ress
Ctrl + Menu
. Check Slave KBD setting “ON”. (Network
▶
Set Slave Kbd
▶
Slave kbd:ON/OFF)
Slave keyboard need to setup as following procedure.
1. Check for dip switch the 7
th
of S2 “ON”.
2. If you setup all connection correctly (See Figure 4) and turn on slave keyboard, you can see
following screen.
3. P
ress
Ctrl + Menu
. Set the Slave ID to 01
4. Set Slave Node to “B” in case that master keyboard model is HTX-3000 and to “B” in case HTX-2000
SCANDOME II Vxxx
Slave ID = 1
Input Password : xxxx
CAM : 000
←
Current Device ID = 1
←
Default setting is
9999
for administrator,
1111
for user
←
000 means that the controller is not connected to the master keyboard
Slave ID = 1
Slave Node : A / B
←
A : HTX-3000 , B : HTX-2000