MAN-0077 Honeywell Global Tracking Ltd
9
The SAT-IDP is supplied without cable or mating connector as standard. Suitable cables and/or
connectors can be purchased separately from your equipment supplier or authorised dealer. See page
18 for connector and pin out details.
When routing the cable avoid sharp edges and pinches.
Be aware of the minimum static bend radius of the cable.
Mechanical pressure on the cable may cause loss of functionality or even a short circuit and
subsequent damage to the terminal.
Use only shielded cables for connecting to peripherals. Using shielded cables ensures that the
appropriate EMC classifications are maintained.
The captive cable on the SAT-IDP-BC, SAT IDP-SC, SAT-401C and SAT-401E is not user replaceable,
tampering with the cable or their fixing points may void the warranty. Damage to the cable could result
in the terminal having to be replaced.
3.3 Location
The SAT-IDP is only weatherproof if the interface connector is correctly mated. Please consult your
dealer if you are in any doubt.
The SAT-IDP should be located with an unobstructed, clear view of the sky.
The SAT-IDP should be mounted on a flat horizontal surface.
Consider the position of the satellites. The Inmarsat satellites are in geostationary orbits above the
equator. (i.e., in the Northern hemisphere the satellites are located to the South; in the Southern
hemisphere the satellites are located to the North.) The further away from the Equator the SAT-IDP is,
the lower the degree of elevation will be above the horizon.
If you plan to install the SAT-IDP in a partially enclosed environment, test operation before committing
to a permanent installation.
On vehicles, the SAT-IDP should be located on the highest point possible, free from obstructions and
safe from damage during normal operation of the host vehicle.
For installations exposed to shock and/or vibration, use a mounting scheme that isolates the unit from
the excessive shock and/or vibration.
Choose a location that is not near radar installations, other satellite communication equipment, and/or
microwave dishes to prevent RF jamming.
Avoid mounting on hot surfaces.
Avoid prolonged exposure to anti-freeze, detergents, windscreen washer fluid and any other similar
chemicals.
