10
Quick Installation Guide
Fan operation settings
1
Press
Menu
, and then press the
Fan
(-)
button to cycle to the next available
Fan mode.
2
Cycle through the modes until the
required Fan mode is displayed,
then press
Done
.
NOTE:
Available Fan modes vary with
system settings.
Fan
modes:
‒
Auto:
Fan runs only when the
heating or cooling system is on.
‒
On:
Fan is always on.
System operation settings
1
Press
Menu
, and then press the
Mode
(+) button to cycle to the next
available System mode.
2
Cycle through the modes until the
required System mode is displayed,
and then press
Done
.
NOTE:
Available System modes vary by
model and system settings.
System
modes:
‒
Auto:
Thermostat selects heating
or cooling as needed.
‒
Heat:
Thermostat controls only the
heating system.
‒
Cool:
Thermostat controls only the
cooling system.
‒
Em Heat (only for heat pumps
with auxiliary heat):
Thermostat
controls Auxiliary Heat. Compressor
is not used.
‒
Off:
Heating and cooling system is
off. Fan will still operate if fan is set
to On.
NOTE:
Heat On/Cool On may flash for 5
minutes due to compressor protection.
