manualshive.com logo in svg

Honeywell RT10A, User Manual

Share
Download
Honeywell RT10A User Manual Download Page 68

58

RT10A Rugged Tablet

Rename the Computer

You can change the name of the computer to make it easier to identify when 
pairing with other Bluetooth enabled devices and view statistics about received 
files.

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

Settings

  

> 

Connected devices

 > 

Connection preferences 

>

 Bluetooth

.

3. Tap 

Device Name

. Type the new name and then tap 

Rename

.

Rename, Share or Unpair a Paired Device

You can rename a paired device to make it easier to identify it on the list or unpair 
the device to remove it from the paired list.

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

Settings

  

> 

Connected devices

 > 

Previously connected devices

.

3. Tap 

 next to the paired device.

4. Take one of the following actions:

•

To rename the device, type the new name, and then tap 

OK

.

•

To  allow 

Internet connection sharing

 or 

Contact Sharing

, tap the check box 

next to the setting.

•

To unpair the device, tap 

Forget

.

About the Scanner Edge App

Your mobile computer is equipped to communicate with scanners using Bluetooth 
technology through the Scanner Edge app. The Bluetooth radio must be turned on. 
System bar icons indicate Bluetooth radio status.

To turn on the Bluetooth radio:

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

Settings

  

> 

Connected devices

 > 

Connection preferences 

> 

Bluetooth

.

3. If necessary, tap 

Off

 

 to toggle the Bluetooth radio 

On

 . 

Connect a Bluetooth Scanner

To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then 
scan a pairing barcode with the Bluetooth scanner.

Summary of Contents for RT10A































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands