Honeywell RT10A, User Manual

Page: 42 / 94

32 RT10A Rugged Tablet
Imager Settings
You should not need to modify the Imager Settings. The Override Recommended
Values setting is disabled by default. The recommended Imager Settings are
designed to work in a wide range of environments and should only be modified if
you have an advanced understanding of imagers.
Trigger Settings
Use the Trigger Settings to configure how the scan buttons work.
Trigger Settings
Region of Interest Set the ROI for decoding. Options include:
• Disable
ROI is disabled and the entire original image is sent to the
decoder.
• Standard
Use the aimer position to weight activity. Activity
calculated on the row and the column in the middle of
each cell. The ROI window may not include the aimer.
• Standard, aimer centered
Activity calculated on the row and the column in the
middle of each cell. The ROI window will always include
the aimer.
• DPM, aimer centered
Activity calculated on 4 rows and 2 columns in each cell.
The ROI window will always include the aimer.
• Kiosk/presentation application
Ignore aimer position, no weight activity. Activity
calculated on the row and the column in the middle of
each cell. The ROI window may not include the aimer.
Disabled
Preferred
Symbology
Settings Use this setting to establish which barcode has priority if more
than one barcode appears on the same label, Options include:
• Preferred Timeout - The length of time the scanner will
ignore a low priority barcode while it searches for a high
priority barcode. If a high priority symbology is located
during this period, then that data is read immediately. If the
time-out period expires before a high priority symbology is
read, the scanner will read any barcode in its view.
• Symbology - set high or low priority.
Disabled
Setting Description Default
Setting Description Default
Enable Scan
Trigger Enable or Disable activating the imager by pressing the side scan
buttons or the virtual Scan button in the Scan Demo app. Enabled
Scan delay Set the minimum amount of time in seconds before the scanner
can read another barcode. 0
Decode timeout Set the number of seconds before the scanner automatically turns
off if the scan button is pressed and nothing has successfully
decoded. 20