Honeywell RABO, Instruction Manual

Page: 9 / 16

ELSTER RABO ® Rotary Gas Meter 09 Honeywell
Units 3.5M/G65 5.5M/G100 9M/G160 14M/G250
A in. [mm] 6.75 [171] 6.75 [171] 9.5 [241] 9.5 [241]
B in. [mm] 7.56 [192] 7.56 [192] 10.08 [256] 10.08 [256]
C in. [mm] 8.63 [219] 8.63 [219] 10.75 [273] 10.75 [273]
D in. [mm] 3.78 [96] 5.43 [138] 5.16 [131] 6.14 [156]
E in. [mm] 7.52 [191] 9.17 [233] 10.67 [271] 11.65 [296]
F in. [mm] 11.26 [286] 14.61 [371] 15.83 [402] 17.76 [451]
G in. [mm] 3.78 [96] 3.78 [96] 5.04 [128] 5.04 [128]
Nom. Pipe Size
*
in. [mm] 2 3 3 4
Bolt Size, H 5/8" - 11 5/8" - 11 5/8" - 11 5/8" - 11
# Bolts/Flange 4 4 4 8
Bolt Circle, J in. [mm] 4.75 [121] 6.00 [152] 6.00 [152] 7.50 [191]
Shipping Weight lbs. [kg] 29.8 [14] 37.7 [17] 73.9 [34] 82.3 [37]
Carton Size
in. 18.3L x 1.6W x 12.6H 23.6L x 13.0W x 13.4H
[mm] 465L x 270W x 320H 600L x 330W x 340H
c) Dimensions and Weights
11. Index
All RABO meters are equipped with a non-resettable totalizing
odometer-style index that displays volume in actual cubic feet. The
index is sealed by an ultraviolet-resistant Lexan cover, requires no
maintenance and is completely isolated from gas pressure.
a) Rotatable
The RABO index can rotate 355 degrees to facilitate desired
reading angle, depending on the installation orientation. To
rotate, simply grasp the index with both hands and turn to the
desired position.
*ANSI Class 125/150 flat face flange connection
F
D E
H
G
J
A
B C
2.36
60
2.36
60
M6x1
b) How to Read
The odometer index is masked to expose the desired digits
and units of measure to meet individual requirements.
On all meters, the right-most digit will be highlighted
with a red square on the index mask, and will always
increment in cubic feet. This digit is typically not included in
the meter read and is primarily used to indicate flow rate.
When reading an odometer, record all the digits except the
digit surrounded by the red square on the index mask, and
multiply it by the factor shown on the index face plate. In the
example on the next page, the reading would be 1357900
cubic feet.[Figure 10].
RABO
®
Rotary Gas Meter 08 Elster Instromet
c) Dimensions and Weights
b) How to Read
11. Index
*ANSI Class 125/150 flat face flange connection
A
B
C
D
E
F
G
Nom. Pipe Size*
Bolt Size, H
# Bolts/Flange
Bolt Circle, J
Shipping Weight
Carton Size
in. [mm]
in. [mm]
in. [mm]
in. [mm]
in. [mm]
in. [mm]
in. [mm]
in. [mm]
in. [mm]
Ibs. [kg]
in.
[mm]
Units
6.75
7.56
8.63
3.78
7.52
11.26
3.78
[171]
[192]
[219]
[96]
[191]
[286]
[96]
6.75
7.56
8.63
5.43
9.17
14.61
3.78
[171]
[192]
[219]
[138]
[233]
[371]
[96]
9.5
10.08
10.75
5.16
10.67
15.83
5.04
[241]
[256]
[273]
[131]
[271]
[402]
[128]
9.5
10.08
10.75
6.14
11.65
17.76
5.04
[241]
[256]
[273]
[156]
[296]
[451]
[128]
4 3 3 2
5/8“ - 11 5/8“ - 11 5/8“ - 11 5/8“ - 11
4 4
4
8
18.3L x 10.6W x 12.6H
465L x 270W x 320H
23.6L x 13.0W x 13.4H
600L x 330W x 340H
4.75
29.8
6.00
37.7
6.00
73.9
7.50
82.3
[121]
[14]
[152]
[17]
[152]
[34]
[191]
[37]
All RABO meters are equipped with a non-resettable totalizing
odometer-style index that displays volume in actual cubic feet. The
index is sealed by an ultraviolet-resistant Lexan cover, requires no
maintenance and is completely isolated from gas pressure.
The RABO index can rotate 355 degrees to facilitate desired
reading angle, depending on the installation orientation. To
rotate, simply grasp the index with both hands and turn to the
desired position.
b) Rotatable
The odometer index is masked to expose the desired digits
and units of measure to meet individual requirements.
On all meters, the right-most digit will be highlighted
with a red square on the index mask, and will always
increment in cubic feet. This digit is typically not included in
the meter read and is primarily used to indicate flow rate.
When reading an odometer, record all the digits except the
digit surrounded by the red square on the index mask, and
multiply it by the factor shown on the index face plate. In the
example on the next page, the reading would be 1357900
cubic feet.[Figure 10].
3.5M/G65
5.5M/G100
9M/G160
14M/G250