Installation Instructions / OmniAssure Touch Square
5
3. Use the following operating system (OS) and revision level, along with
the credential device application software with following level: Boot-
loader V4.2.xxx / Application 4.2.xxx / OS 4.2.xxx
4. Installer/dealer can access the reader via config app ‘Reader Utility by
Honeywell’ (Google Play store). Verification is required (SITE code).
The access control system uses 3 types of verification for the user:
Available are pin code, physical credential and mobile credential.
– The reading of a physical credential and an electronic device (BLE),
transmitting user data to the reader interface is the same.
– Have a look at the manual of the system for more details like instruc-
tions on how to silence a trouble, functions of all switches/buttons,
description of the conditions that might be expected to result in false
alarms or impaired operation of the product and service information.
5
Classifications
UL 294:
Destructive attack level
IV
, line security level
I
,
endurance level
IV
, power level
I
.
Access Control Feature: Single Point Locking
Device with Key Locks Level I.
EN 60839-11-1:
Grade 3, environmental class
III
6
Certifications
CE, FCC, UL294
FCC ID:
UA2OT4XXXBHON
UA2OT4XXXWHON
Intertek:
ETL listed Intertek 5014020
7
FCC Regulations
7.1
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
7.2
Compliance statement
This device complies with part 15 of the FCC Rules and with the Industry
Canada license-exempt RSS standard(s). Operation is subject to the fol-
lowing two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
7.3
Information to the user (Part 15.105 (b))
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
8
CE Declaration of conformity
Hereby, the Novar GmbH declares that the radio equip-
ment readers OmniAssure, item no. OT4700BHONG,
OT4716BHONG,
OT4800BHONG
,
OT4816BHONG
,
OT4700WHONG, OT4716WHONG, OT4800WHONG
and OT4816BHONG
are in compliance with Directive
2014/53/EU.
This symbol on our product shows a crossed-out
"wheelie-bin" as required by law regarding the Waste
of Electrical and Electronic Equipment (WEEE) disposal.
This indicates your responsibility to contribute in saving
the environment by proper disposal of this Waste i.e.
Do not dispose of this product with your other wastes.
To know the right disposal mechanism please check the
applicable law.
The full text of the EU declaration can be downloaded from our homepage
https://www.security.honeywell.de/
in the service/download area.
9
Technical specification
Dimensions
80 x 80 x 22 mm / 3.15 x 3.15 x 0.87 inch
Operating temperature
-40 °C to 66 °C / -40 °F to 151 °F
Protection class
IP65
Protection class UL/ULC
IP4X / IK04 (enclosure)
Environmental class
III
Humidity condition
max. 93±2% at 32±2 °C / 89.6±3.6 °F
0 - 95% non-condensing
Installation and use
Indoor and outdoor usage
Interfaces
Wiegand, RS-485
Reading range
0 ... ≈70 mm / 0 ... ≈2,75" (depending on credential)
BLE range
0 ... ≈5 m / 0 ... ≈197"
Power supply reader
7.0 V to 18 V DC (12 V recommended)
mA
Watt
at 7 V DC
at 12 V DC at 18 V DC
avg peak avg
1)
peak
2)
avg
1)
peak
2)
avg
1)
peak
2)
Max. Power consumption
Current consumption
1.8 4.0 250
530
150
320
100
220
Used frequency bands
- 119 kHz to 135 kHz
- 13.56 MHz
- 2400 to 2483.5 MHz
Transmitted power
< 10 dBμA/m
< 0 dBμA/m
< 1 mW e.i.r.p.
1) The "average" current is measured in Idle mode (factory setting, light
ring is slightly blue)
2) The "peak" current is measured with card activation (factory setting,
light ring is on)
