Honeywell NOTIFIER NRX-WS-RR, Installation Instructions Manual

Page: 3 / 15

N200-310-00 I56-6591-001
Table 1: Sounder Tones
No Pattern Nominal
Frequency (Hz)
Switching Cycle 2nd Stage
Tone
2 Alternating 800/970 1Hz 8
3 Alternating 800/970 2Hz 8
4 Alternating 2400/2900 3Hz 10
5 Alternating 2500/3100 2Hz 10
6 Alternating 988/645 2Hz 8
7 Continuous 660 1
8 (3) Continuous 970 2 (3)
9 Continuous 1200 2
10 Continuous 2850 4
11 Sweep 150‐1000 Rising from 150Hz to 1000Hz (10s), 40s
@ 1000 Hz, falling from 1000Hz to 150Hz
(10s), 20s @ 150Hz (Total 80s)
22
13 (1) Sweep 500 ‐ 1200 0.25s off, 3.75s on 12
14 (1) Intermittent 660 3.33Hz 150ms on, 150ms off 7
15 (1) Intermittent 970 0.8Hz 0.25s on, 1s off 8
16 (1) Intermittent 970 0.5Hz 1s on, 1s off 8
17 (1) Intermittent 2850 1Hz 10
18 (1) Intermittent 970 1Hz 500ms on, 500ms off 8
19 (1) Intermittent 950 0.22Hz (0.5s on, 0.5s off) rpt x3, 1.5s off 12
20 (1) Continuous 800 22
21
(1)
Sweep 400‐1200 (0.5s on, 0.5s off) rpt x3, 1.5s off 12
22 Sweep 1200 ‐ 500 0.99Hz 1s on, 0.01s off 20
23 Sweep 2400 ‐ 2850 7Hz 10
24 (1) Sweep 500 ‐ 1200 (0.5s off, 3.5s on) 8
25 Sweep 800 ‐ 970 50Hz 8
26 Sweep 800 ‐ 970 7Hz 8
27 Sweep 800 ‐ 970 1Hz 8
28 Sweep 2400 – 2850 50Hz 10
29 Sweep 500 – 1000 7Hz 8
30 Sweep 500 – 1200 – 500 0.166Hz rise 1s, stable 4s, fall 1s 8
31 Sweep 800 – 1000 2Hz 8
32 Sweep 2400 ‐ 2850 1Hz 10
33
(2)
Continuous 4000 5
36 (1) Intermittent 660 0.05Hz 6.5s on, 13s off 7
37 (1,2) Intermittent 660 0.277Hz 1.8s on, 1.8s off 7
38 (1,2) Intermittent 2850 4Hz (150ms on, 100ms off) 10
Notes:
(1) Tones not affected by intermittent user pattern
(2) Only available through Advanced Protocol commands
(3) Default tones; (Default volume = HIGH)
Sounder Output data, in accordance with EN54-3, is available in Document Ref: S00-7000-000.
Note: LOW volume tones are not approved to EN54-3.