- 33 -
Communication Setup
EX PTZ ID : 0001
Baudrate : 9600
Protocol : AUTO
Save And Exit
1.
Move the joystick handle right. You can select EXPTZ ID to select the joystick up or down.
2.
Move the joystick handle right. You can select BARDRATE (2400/ 4800/ 9600/ 19200/
38400) to select the joystick up or down.
3.
Move the joystick handle right. You can select protocol by the joystick up or down. The
protocol can support PP(Pelco P), PD(Pelco D), EZ, etc.
4.
Save and exit with joystick handle to right ( Or ESC to exit without saving)
5.
You should use the remote controller which was included to the product to change its
protocol for communicating and initial setting.
Program and Operation
7. COMMUNICATION
8. RUN FUNCTION
1. Select the function and number which has been stored previously.
2. Select Run by moving the joystick to right.
Run Function
Function :
Number :
Action
Run
Exit
ENG