- 32 -
Program and Operation
Erase programmed data in the EEPROM of the selected NEXPTZ camera. Press
MENU or
ENTER
button to erase data,
ESC
key to exit without erasing. Origin offset value is not
affected.
CAUTION
: Unless you download the data into a safe place, all the data in the selected EXPTZ
camera will be lost.
System Information
Camera Type : xxxxxx
H/W Version : V1.0
ROM Version : V1.2
Protocol : S2E
Buadrate : 9600BPS
Exit
This screen shows information of the NEXPTZ camera for service or trouble shooting.
5.6 ERASE DATA (
MENU
=> Setup =>
Erase Data)
Erase Programmed DATA
Are you sure?(Yes/No)
YES : ENTER KEY
or MENU KEY
NO : ESC KEY
5.7 SYSTEM INFORMATION (
MENU
=> Setup =>
System Information)
6. PASSWORD
Password Setup
Enable Password : ON/OFF
Edit Password : ****
Save And Exit
1.
Change password : Move the joystick handle right and up or down or twist to select
number 0~9(a number of four figures), and do same way to confirm.
2.
Save and exit with joystick handle to right ( Or ESC to exit without saving)
You can change or set the password with 4-digit characters in this menu.
ENG
