Honeywell N86 Series, User Manual

Page: 66 / 218

5 - 4
Discard to exit without saving any data format changes.
Terminal ID Table
Data Format Editor Commands
Send Commands
Send all characters
F1 Include in the output message all of the characters from the input
message, starting from current cursor position, followed by an insert
character.
Syntax = F1xx where xx stands for the insert character’s hex
value for its ASCII code.
Refer to the
ASCII Conversion Chart (Code Page 1252) , page A-4 for
decimal, hex and character codes.
Send a number of characters
F2 Include in the output message a number of characters followed by an
insert character. Start from the current cursor position and continue for
“nn” characters or through the last character in the input message,
followed by character “xx.”
Syntax = F2nnxx where nn stands for the
numeric value (00-99) for the number of characters, and xx stands for
the insert character’s hex value for its ASCII code.
Refer to the
ASCII Conversion Chart (Code Page 1252) , page A-4 for
decimal, hex and character codes.
Interface Description
Terminal
ID
RS232 TTL 000
USB COM Port Emulation
130
PC Keyboard
124
Clear One Data Format
Clear All Data Formats
Save
Discard