Honeywell MP Nova Mark II, User Manual

Page: 51 / 85

Chapter 5 — Printer Operation
42 MP Nova Mark II User Guide
Media Calibration
The printer is factory-calibrated for operation with most media types (both gap
and black mark). Try your media without performing any calibration adjustments
first; this will determine if the factory settings are compatible. Only perform the
calibration adjustments if you are experiencing media-registration issues.
The Quick Media Calibration should be performed first, if it fails to detect your
label media proceed to the
“Manual Media Calibration” on page 43
procedure.
Quick Calibration
The Quick Media Calibration can be performed using the NETira CT
configuration utility, (see
“Printer Configuration Utility (NETira CT)” on
page 31 for more information).
1 Launch the NETira CT configuration utility and query (connect) to the printer.
2 Click on the Sensor Calibration printer component.
3 Install your media in the printer and click the Quick Media button.
4 The printer will feed the media while the sensor is being calibrated. At the
end of the process, a message will be shown, indicating a successful
calibration. Values displayed in the “New Value” column may change after a
calibration.