background image

SERIES 61 AND SERIES 62 MODUTROL IV™ MOTORS

63-2188—4

2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1.

Your local Home and Building Control Sales Office (check white pages of your phone directory).

2.

Home and Building Control Customer Relations

Honeywell, 1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

Models: 

TRADELINE models are selected and packaged to 

provide ease of stocking, ease of handling and maximum 

replacement value. TRADELINE model specifications are the 

same as those of standard models unless specified otherwise. 

TRADELINE models have auxiliary switch cams.

NOTE: Auxiliary switches can only be added to motors that 

include auxiliary switch cams. (These cams cannot 

be field-added.)

Modutrol IV Order Number Guide: 

See Table 1.

Dimensions: 

See Fig. 1.

Table 1. Modutrol IV Order Number Guide.

a

Electrically normally closed. Shaft rotates clockwise (viewed from the power end) with increase in control signal. Motor drives to 

normally closed position when powered with control wiring not connected.

b

Electrically normally open. Shaft rotates counterclockwise (viewed from the power end) with increase in control signal. Motor 

drives to normally open position when powered with control wiring not connected.

M

Motor
61

Floating Control

62

Floating Control with feedback
6

35 lb-in. Non-Spring Return

7

25 lb-in. Spring Return 75 lb-in. Non-Spring Return

8

60 lb-in. Spring Return 150 lb-in. Non-Spring Return

9

300 lb-in. Non-Spring Return

1

Single-ended shaft

Non-Spring Return

2

Normally Closed

a

 Spring Return

3

Normally Open

b

 Spring Return

4

Dual-ended shaft

Non-Spring Return

5

Normally Closed

a

 Spring Return

6

Normally Open

b

 Spring Return

A

0 Auxiliary Switches Fixed Stroke

Normally Closed

a

B

1 Auxiliary Switch

C

2 Auxiliary Switches

D

0 Auxiliary Switch

Adjustable Stroke

E

1 Auxiliary Switch

F

2 Auxiliary Switches

G

0 Auxiliary Switch

Fixed Stroke

Normally Open

b

H

1 Auxiliary Switch

J

2 Auxiliary Switches

K

0 Auxiliary Switch

Adjustable Stroke

L

1 Auxiliary Switch

M

2 Auxiliary Switches

M

61

8

4

A

XXXX

See Catalog for Complete O.S. Number

Summary of Contents for Modutrol IV Series 61













Reviews: