Honeywell Miller Revolution, Instruction And Use Manual

Page: 7 / 12

U s e r I n s t r u c t i o n s - E n g l i s h
7
Installing Optional Accessories
/RFDWHWKH¿JXUH
“8” shaped com-
posite attachment
clip on the back
of the accessory.
Identify the
green button
attachment
point on the
belt or harness
that will be
used.
Place the
widest end of
WKH¿JXUH³´
over the green
connection
button.
Push the acces-
sory downward
until you feel it
snap into place.
1
2
3
4
To remove,
reverse
procedure by
gripping 1” loop
and pulling
upward.
5
Connecting Accessories
Installing Attachment Points to Belts
To install the belt attach-
ment clip onto a belt,
Make sure the smaller
FLUFOHRIWKH¿JXUH³´
shape is at the top and
to the inside, then slide
onto belt.
To install the belt attach-
ment clip onto a belt, sim-
ply slide on to the belt.
Miller integrated accessories have a weight limit of 25 lbs. when con-
nected via the composite link. For loads heavier than 25 lbs., connecting
to a belt via the tunnel loop is recommended for more even weight distri-
bution.
The combined weight of the harness user, and all attached
tools and accessories should not exceed the maximum capacity of
the fall protection system being used.