Honeywell Miller Revolution, Instruction And Use Manual

Page: 5 / 12

U s e r I n s t r u c t i o n s - E n g l i s h
5
Hold harness by
back D-ring. Shake
harness to allow
all straps to fall in
place. If leg or chest
straps are
buckled, release
straps and
unbuckle at this
time.
Slip straps over
shoulders so D-ring
is located in the
middle of the back
between shoulder
blades.
Attach integral
waist belt.
Connecting belt
¿UVWHQVXUHV
PivotLink is in the
proper location.
1 2
3 4
Pull buckle portion
of leg strap
between legs
and connect to
opposite end of leg
strap. Repeat with
second leg strap. Connect chest
strap. The shoulder
strap retainer
(chest strap) must
be positioned in
the mid-chest area
6” (152mm) to 8”
(203mm) below
the trachea but not
below the sternum.
Fasten securely
to keep shoulder
straps taut.
After all straps
have been buckled,
tighten webbing so
WKDWKDUQHVV¿WV
snug, but allows full
range of movement.
To maximize
comfort, be sure to
adjust the harness
so that the PivotLink
centers are just
outside of your
hipbone.
5 6
7
9
Miller Fall Protection recommends hanging
the harness by back D-ring to help it keep
its shape when not in use and provide
the worker with a starting point when next
attempting to don the harness.
8
To remove harness, reverse procedure.
Donning the Revolution with Belt